桥上AB墙钢模具是一种功能性强、使用方便、使用次数多的保护设备,其特点是生产速度快、施工简单。模具的施工方式也是现场浇筑,是因为本身的体积大,而且需要浇筑的泥浆很多,所以使用现场制作的话,施工会方便很多,像模具的制作方法也很简单,使用现场浇筑的方式就可以加工出来合格的AB墙,模具的整体施工时间少,加工出来的AB墙的表面非常的光滑及美观。因为桥上AB墙钢模具一般都是钢的材质,所以重复使用也是没有问题的。在浇筑混凝土时需要在模具内侧刷油,浇筑完之后等到固定成型进行脱模。等待2-3小时即可。后期养护也是非常重要的,使用完模具之后要进行清洁,要用专门的清洁剂进行清洁,避免下次使用造成不必要的困难。Becausethe AB wall steel molds on the bridge are usually made of steel,there is no problem with repeated use. When pouring concrete, it isnecessary to brush oil on the inside of the mold, and wait until itis fixed and formed before demolding. Wait for 2-3 hours. Postmaintenance is also very important. After using the mold, it shouldbe cleaned with specialized cleaning agents to avoid unnecessarydifficulties caused by the next use.