注notes:
1、大车运行标准速度为2-20m/min(变频调速);
The standard travelling speed of craneis 3-30m/min (frequency conversion)
小车运行标准速度为2-20m/min(变频调速);
The standard travelling speed oftrolley is 2-20m/min (frequency conversion)
2、除了标准起升速度外,还有多种速度可供选择,小型起重机,也可选用变频控制起升。
There are many optional speed levelsand frequency control lifting except the standard speed.
3、控制方式有多种:地操操作、遥控器操作及两者的组合。
Control methods: ground control, remotecontrol and the combination control of the two.
4、表格中数据仅供参考,如有变更,单梁桥式起重机生产厂家,恕不另作通知。
The data listed in the form is only forreference. Please forgive the non-informing if the datechanged.
5、具体事宜或特殊请求请与我公司协商。
Please contact us for more details andspecial re
悬臂起重机超起作业的操作过程,无油缸型超起装置安装简便快捷,但使用过程中注意事项较多,彭州单梁桥式起重机,操作技术难度大;水平+垂直油缸型超起装置结构复杂、成本高、组装费时,但使用方便,操作灵活,并且可实现超起配重无级变幅;水平油缸型较前者安装简便,成本低,但使用性能与无油缸型差不多,单梁桥式起重机厂,只是在超起配重离地后能够无级变幅;垂直油缸型超起装置相对水平+垂直油缸型结构简单,成本较低,组装时间差不多,使用上也比较方便。
H3-起重机底部到大车轨道面的距离 Distance between thebottom of crane and crane rail plane
H4-起重机缓冲器到大车轨道面的距离 Distance betweenbuffer of crane and crane rail plane
H5-起重机顶部到大车轨道面的距离 Distance between thetop of crane and crane rail plane
W-起重机*外两个车轮之间的距离 Distance between twooutmost wheels of crane
W1-起重机一角*外两个车轮之间的距离 Distance betweentwo outmost wheels of one corner of crane
W2-起重机台车两个车轮之间的距离 Distance between twowheels of trolley
B-起重机*外车轮距离缓冲器端部之间的距离 Distance from theoutmost wheel to ends of buffer
b-起重机*端部距离大车轨道之间的距离 Distance from endsto rail of crane
G-起重机整车的重量 Overall weight of crane
K-起重机*大轮压 Maximum wheel pressure ofcrane
P-起重机总的功率 Total power of crane
小型起重机-成都吉尼起重机-彭州单梁桥式起重机由成都吉尼起重机械有限公司提供。成都吉尼起重机械有限公司(www.hytfqz.com/)有实力,信誉好,在四川成都的工程、建筑起重机等行业积累了大批忠诚的客户。公司精益求精的工作态度和不断的完善创新理念将促进成都吉尼起重和您携手步入,共创美好未来!