高速流水槽钢模具 耐用 不变形 可定做

保定市大进模具厂专业生产高速流水槽钢模具、铁路流水槽钢模具、市政流水槽钢模具、涵洞水槽模具、集水槽模具、泄水槽模具、流水槽模具、跌水槽模具、排水沟模具、渡水槽钢模具、截水槽钢模

具、U型槽钢模具、U型槽塑料模具、急流槽钢模具、电缆沟钢模具、现浇边沟钢模具等。

高速流水槽钢模具规格：

长度50cm、60cm、100cm、150cm、200cm、400cm，

宽度40cm、50cm、60cm、100cm、150cm，

深度：30cm、40cm、50cm、100cm、125cm，

壁厚：5cm、6cm、8cm、10cm、20cm，模具尺寸可以定做。

高速流水槽钢模具使用方法：在水槽模具里面喷一层机油和脱模剂，有利于脱模具，将搅拌好的水泥或混凝土倒入模具中，经振动平台或振动棒振动成形，等水泥初期凝固之后便可脱模，约24小时左右。

Baoding Dajin Die Factory specializes in the production ofhigh-speed flume steel molds, railway flume steel molds, municipalflume steel molds, culvert flume molds, catchment molds, drainflume molds, flume molds, drop flume molds, drain flume molds,aqueduct steel molds, water interception flume steel molds

Tool, U-channel steel mold, U-channel plastic mold, jet channelsteel mold, cable channel steel mold, cast-in-place edge channelsteel mold and so on.

Specification for high speed water channel die:

Length 50cm, 60cm, 100cm, 150cm, 200cm, 400cm.

Width 40cm, 50cm, 60cm, 100cm, 150cm.

Depth: 30cm, 40cm, 50cm, 100cm, 125cm.

Wall thickness: 5cm, 6cm, 8cm, 10cm, 20cm, mold size can becustomized.

High-speed flume steel mold usage method: First of all, spray alayer of oil and mold release agent in the flume mold, conducive tomold release, and then mix cement or concrete into the mold,vibration platform or vibrating rod vibration molding, etc. afterthe initial solidification of cement can be demoulded, about 24hours.